CRT1206-BY1002_LF RES THN FLM 1206 10KOHM 1% 25PPM 0.125W- by Bourns Inc.

CRT1206-BY1002_LF | Bourns Inc. RES THN FLM 1206 10KOHM 1% 25PPM 0.125W-

Name: CRT1206-BY1002_LF
Brand: Bourns Inc.
SKU: CRT1206-BY1002_LF

Category: Chip Resistors - Surface Mount

Brand: Bourns Inc.

RES THN FLM 1206 10KOHM 1% 25PPM 0.125W-

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: RES THN FLM 1206 10KOHM 1% 25PPM 0.125W-

Technical Parameters

Applications	General Purpose
Brand	Bourns
Composition	Thick Film
Data Tier	Family Level
Failure Rate	Not Applicable
Features	General Purpose
Lead Free	Yes
Mounting Type	Surface Mount
Number of Terminals	2
Operating Temperature	-55 to +125 C
Package / Case	SMD / Through Hole
Packaging	Tape & Reel
Product Type	Resistor / Inductor / Trimmer
RoHS	Compliant
Termination	Solder

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

CRT1206-BY1002_LF Application and Selection Guide

CRT1206-BY1002_LF Model and Manufacturer Information

CRT1206-BY1002_LF, a Chip Resistors - Surface Mount manufactured by Bourns: CRT1206-BY1002_LF helps you confirm the specific model, while Bourns helps you confirm the product source. If you are selecting a part, you can first check whether CRT1206-BY1002_LF meets your requirements, then check whether Bourns matches your expectations, and then refer to RES THN FLM 1206 10KOHM 1% 25PPM 0.125W- for further evaluation.

CRT1206-BY1002_LF Product Parameters and Description

The main parameters of Bourns's Chip Resistors - Surface Mount product CRT1206-BY1002_LF include RES THN FLM 1206 10KOHM 1% 25PPM 0.125W-. This is a Chip Resistors - Surface Mount produced by Bourns, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

CRT1206-BY1002_LF Application and Selection Reference

Bourns's Chip Resistors - Surface Mount product CRT1206-BY1002_LF has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, CRT1206-BY1002_LF is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Bourns provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for CRT1206-BY1002_LF

Designers looking for CRT1206-BY1002_LF recommended parts can evaluate the following options. CRT1206-BY1002_LF selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
CR0805-FX-27R0ELF	Bourns Inc.	RES 27 OHM 1/8W 1% 0805 SMD
CRF0805-FZ-R020ELF	Bourns Inc.	Current Sense Resistors - SMD 0.020ohms 1% +/- 50PPM
CR0603-FX-1502ELF	Bourns Inc.	RES SMD 15K OHM 1% 1/10W 0603

EZKEY can provide CRT1206-BY1002_LF recommended part comparison data and engineering samples for evaluation.