CRM1206FX1000ELF Res Thick Film 1206 100 Ohm 1% 0.5W(1/2W) ±100ppm/°C Pad SMD T/R by Bourns

CRM1206FX1000ELF | Bourns Res Thick Film 1206 100 Ohm 1% 0.5W(1/2W) ±100ppm/°C Pad SMD T/R

Name: CRM1206FX1000ELF
Brand: Bourns
SKU: CRM1206FX1000ELF

Category: Chip Resistors - Surface Mount

Brand: Bourns

Res Thick Film 1206 100 Ohm 1% 0.5W(1/2W) ±100ppm/°C Pad SMD T/R

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Res Thick Film 1206 100 Ohm 1% 0.5W(1/2W) ±100ppm/°C Pad SMD T/R

Technical Parameters

Applications	General Purpose
Brand	Bourns
Composition	Thick Film
Data Tier	Family Level
Failure Rate	Not Applicable
Features	General Purpose
Lead Free	Yes
Mounting Type	Surface Mount
Number of Terminals	2
Operating Temperature	-55 to +125 C
Package / Case	SMD / Through Hole
Packaging	Tape & Reel
Product Type	Resistor / Inductor / Trimmer
RoHS	Compliant
Termination	Solder

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

CRM1206FX1000ELF Application and Selection Guide

CRM1206FX1000ELF Model and Manufacturer Information

CRM1206FX1000ELF, a Chip Resistors - Surface Mount manufactured by Bourns: CRM1206FX1000ELF helps you confirm the specific model, while Bourns helps you confirm the product source. If you are selecting a part, you can first check whether CRM1206FX1000ELF meets your requirements, then check whether Bourns matches your expectations, and then refer to Res Thick Film 1206 100 Ohm 1% 0.5W(1/2W) ±100ppm/°C Pad SMD T/R for further evaluation.

CRM1206FX1000ELF Product Parameters and Description

The main parameters of Bourns's Chip Resistors - Surface Mount product CRM1206FX1000ELF include Res Thick Film 1206 100 Ohm 1% 0.5W(1/2W) ±100ppm/°C Pad SMD T/R. This is a Chip Resistors - Surface Mount produced by Bourns, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

CRM1206FX1000ELF Application and Selection Reference

Bourns's Chip Resistors - Surface Mount product CRM1206FX1000ELF has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, CRM1206FX1000ELF is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Bourns provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for CRM1206FX1000ELF

Designers looking for CRM1206FX1000ELF recommended parts can evaluate the following options. CRM1206FX1000ELF selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
CRE2512-FZ-R005E-3	BOURNS	Current Sense Resistors - SMD .005 Ohms 3W 1% AEC-Q200 2512
CR0402AFX-1001GLF	Bourns
CRS2512-FX-27R0EL	Bourns

EZKEY can provide CRM1206FX1000ELF recommended part comparison data and engineering samples for evaluation.