CR2512FX3301ELF RES SMD 3.3K OHM 1% 1W 2512 by Bourns Inc.

CR2512FX3301ELF | Bourns Inc. RES SMD 3.3K OHM 1% 1W 2512

Name: CR2512FX3301ELF
Brand: Bourns Inc.
SKU: CR2512FX3301ELF

Category: Chip Resistors - Surface Mount

Brand: Bourns Inc.

RES SMD 3.3K OHM 1% 1W 2512

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: RES SMD 3.3K OHM 1% 1W 2512

Technical Parameters

Applications	General Purpose
Brand	Bourns
Composition	Thick Film
Data Tier	Family Level
Failure Rate	Not Applicable
Features	General Purpose
Lead Free	Yes
Mounting Type	Surface Mount
Number of Terminals	2
Operating Temperature	-55 to +125 C
Package / Case	SMD / Through Hole
Packaging	Tape & Reel
Product Type	Resistor / Inductor / Trimmer
RoHS	Compliant
Termination	Solder

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

CR2512FX3301ELF Application and Selection Guide

CR2512FX3301ELF Model and Manufacturer Information

CR2512FX3301ELF, a Chip Resistors - Surface Mount manufactured by Bourns: CR2512FX3301ELF helps you confirm the specific model, while Bourns helps you confirm the product source. If you are selecting a part, you can first check whether CR2512FX3301ELF meets your requirements, then check whether Bourns matches your expectations, and then refer to RES SMD 3.3K OHM 1% 1W 2512 for further evaluation.

CR2512FX3301ELF Product Parameters and Description

The main parameters of Bourns's Chip Resistors - Surface Mount product CR2512FX3301ELF include RES SMD 3.3K OHM 1% 1W 2512. This is a Chip Resistors - Surface Mount produced by Bourns, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

CR2512FX3301ELF Application and Selection Reference

Bourns's Chip Resistors - Surface Mount product CR2512FX3301ELF has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, CR2512FX3301ELF is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Bourns provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for CR2512FX3301ELF

Designers looking for CR2512FX3301ELF recommended parts can evaluate the following options. CR2512FX3301ELF selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
CM453232-681KL	Bourns Inc.	INDUCTOR CHIP 680UH 10% 1812 SMD
CRE2512-FZ-R002E-2	Bourns Inc.	RES SMD 2 MOHM 1% 2W 2512
CR0603-FX-3571ELF	Bourns Inc.	RES 3.57K OHM 1/10W 1% 0603 SMD

EZKEY can provide CR2512FX3301ELF recommended part comparison data and engineering samples for evaluation.