CM201212-R10KL FIXED IND 100NH 285MA 780 MOHM by Bourns Inc.

CM201212-R10KL | Bourns Inc. FIXED IND 100NH 285MA 780 MOHM

Name: CM201212-R10KL
Brand: Bourns Inc.
SKU: CM201212-R10KL

Category: Chip Resistors - Surface Mount

Brand: Bourns Inc.

FIXED IND 100NH 285MA 780 MOHM

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: FIXED IND 100NH 285MA 780 MOHM

Technical Parameters

Applications	General Purpose
Brand	Bourns
Composition	Thick Film
Data Tier	Family Level
Failure Rate	Not Applicable
Features	General Purpose
Lead Free	Yes
Mounting Type	Surface Mount
Number of Terminals	2
Operating Temperature	-55 to +125 C
Package / Case	SMD / Through Hole
Packaging	Tape & Reel
Product Type	Resistor / Inductor / Trimmer
RoHS	Compliant
Termination	Solder

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

CM201212-R10KL Application and Selection Guide

CM201212-R10KL Model and Manufacturer Information

CM201212-R10KL, a Chip Resistors - Surface Mount manufactured by Bourns: CM201212-R10KL helps you confirm the specific model, while Bourns helps you confirm the product source. If you are selecting a part, you can first check whether CM201212-R10KL meets your requirements, then check whether Bourns matches your expectations, and then refer to FIXED IND 100NH 285MA 780 MOHM for further evaluation.

CM201212-R10KL Product Parameters and Description

The main parameters of Bourns's Chip Resistors - Surface Mount product CM201212-R10KL include FIXED IND 100NH 285MA 780 MOHM. This is a Chip Resistors - Surface Mount produced by Bourns, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

CM201212-R10KL Application and Selection Reference

Bourns's Chip Resistors - Surface Mount product CM201212-R10KL has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, CM201212-R10KL is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Bourns provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for CM201212-R10KL

Designers looking for CM201212-R10KL recommended parts can evaluate the following options. CM201212-R10KL selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
CR1206-FX-4993ELF	Bourns Inc.	RES SMD 499K OHM 1% 1/4W 1206
CRM2512-JW-100ELF	Bourns Inc.	RES SMD 10 OHM 5% 2W 2512
CRA2512-FZ-R030ELF	Bourns Inc.	RES 0.03 OHM 3W 1% 2512 SMD

EZKEY can provide CM201212-R10KL recommended part comparison data and engineering samples for evaluation.