CCF1N2.5TE Surface Mount Fuses 2.5A AC 125V/DC 60V by KOA

CCF1N2.5TE | KOA Surface Mount Fuses 2.5A AC 125V/DC 60V

Name: CCF1N2.5TE
Brand: KOA
SKU: CCF1N2.5TE

Category: Carbon Film Resistors - Through Hole

Brand: KOA

Surface Mount Fuses 2.5A AC 125V/DC 60V

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Surface Mount Fuses 2.5A AC 125V/DC 60V

Technical Parameters

Applications	General Purpose
Composition	Thick Film
Data Tier	General Description
Failure Rate	Not Applicable
Features	General Purpose
Lead Free	Yes
Mounting Type	Through Hole/SMD
Number of Terminals	2
Operating Temperature	-55°C ~ +155°C
Operating Temperature Range	-55°C ~ +155°C
Packaging	Tape & Reel
Power Rating	0.25W
Product Type	Resistor
RoHS	Compliant
Termination	Solder
Tolerance	±5%

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

CCF1N2.5TE Application and Selection Guide

CCF1N2.5TE Model and Manufacturer Information

CCF1N2.5TE, a Carbon Film Resistors - Through Hole manufactured by KOA: CCF1N2.5TE helps you confirm the specific model, while KOA helps you confirm the product source. If you are selecting a part, you can first check whether CCF1N2.5TE meets your requirements, then check whether KOA matches your expectations, and then refer to Surface Mount Fuses 2.5A AC 125V/DC 60V for further evaluation.

CCF1N2.5TE Product Parameters and Description

The main parameters of KOA's Carbon Film Resistors - Through Hole product CCF1N2.5TE include Surface Mount Fuses 2.5A AC 125V/DC 60V. This is a Carbon Film Resistors - Through Hole produced by KOA, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

CCF1N2.5TE Application and Selection Reference

KOA's Carbon Film Resistors - Through Hole product CCF1N2.5TE has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, CCF1N2.5TE is a Carbon Film Resistors - Through Hole solution worth considering, and manufacturer KOA provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for CCF1N2.5TE

Designers looking for CCF1N2.5TE recommended parts can evaluate the following options. CCF1N2.5TE selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
CCF1F5TTE	KOA	Surface Mount Fuses 5 Amp AC 125V / DC 125V
CF1/4CT52R561J	KOA	碳膜电阻器 - 透孔 560 ohm 5%
CF1/4CT52R563J	KOA	碳膜电阻器 - 透孔 56K OHM 5%

EZKEY can provide CCF1N2.5TE recommended part comparison data and engineering samples for evaluation.