CA25C2403HMR XTAL OSC XO 24.0000MHZ HCMOS TTL by CTS Corporation

CA25C2403HMR | CTS Corporation XTAL OSC XO 24.0000MHZ HCMOS TTL

Name: CA25C2403HMR
Brand: CTS Corporation
SKU: CA25C2403HMR

Category: MEMS Oscillators

Brand: CTS Corporation

XTAL OSC XO 24.0000MHZ HCMOS TTL

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: XTAL OSC XO 24.0000MHZ HCMOS TTL

Technical Parameters

Data Tier	Family Level
Enable	OE/ST pin option
Frequency	25 Hz
Jitter	Low (MEMS)
Mounting	Surface Mount
Mounting Type	Surface Mount
Operating Temperature	-40°C ~ +85°C
OperatingTemp	-40°C to +85°C
Output	CMOS / HCMOS
PackageCase	SMD ceramic (3225/5032)
Packaging	Tape & Reel
Product Type	Crystal Oscillator
RoHS	Compliant
Series	CTS MEMS / silicon oscillator
Stability	±20 ppm (±50 ppm over temp)

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

CA25C2403HMR Application and Selection Guide

CA25C2403HMR Model and Manufacturer Information

CA25C2403HMR, a MEMS Oscillators manufactured by CTS Corporation: CA25C2403HMR helps you confirm the specific model, while CTS Corporation helps you confirm the product source. If you are selecting a part, you can first check whether CA25C2403HMR meets your requirements, then check whether CTS Corporation matches your expectations, and then refer to XTAL OSC XO 24.0000MHZ HCMOS TTL for further evaluation.

CA25C2403HMR Product Parameters and Description

The main parameters of CTS Corporation's MEMS Oscillators product CA25C2403HMR include XTAL OSC XO 24.0000MHZ HCMOS TTL. This is a MEMS Oscillators produced by CTS Corporation, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

CA25C2403HMR Application and Selection Reference

CTS Corporation's MEMS Oscillators product CA25C2403HMR has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, CA25C2403HMR is a MEMS Oscillators solution worth considering, and manufacturer CTS Corporation provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for CA25C2403HMR

Designers looking for CA25C2403HMR recommended parts can evaluate the following options. CA25C2403HMR selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
CB3LV-3I-100M000000	CTS Corporation	XTAL OSC XO 100.0000MHZ HCMOS
CB33C8M0000T	CTS Corporation	CTS CORPORATION
CB3LV-3I-33M3330-T	CTS Corporation	--

EZKEY can provide CA25C2403HMR recommended part comparison data and engineering samples for evaluation.