ABS05-32.768KHZ-T Application and Selection Guide
ABS05-32.768KHZ-T Model and Manufacturer Information
ABS05-32.768KHZ-T, a Crystals / Oscillators manufactured by Abracon: ABS05-32.768KHZ-T helps you confirm the specific model, while Abracon helps you confirm the product source. If you are selecting a part, you can first check whether ABS05-32.768KHZ-T meets your requirements, then check whether Abracon matches your expectations, and then refer to 晶体 32.768K HZ 12.5PF SMD -40+85C for further evaluation.
ABS05-32.768KHZ-T Product Parameters and Description
The main parameters of Abracon's Crystals / Oscillators product ABS05-32.768KHZ-T include 晶体 32.768K HZ 12.5PF SMD -40+85C. This is a Crystals / Oscillators produced by Abracon, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.
ABS05-32.768KHZ-T Application and Selection Reference
Abracon's Crystals / Oscillators product ABS05-32.768KHZ-T has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, ABS05-32.768KHZ-T is a Crystals / Oscillators solution worth considering, and manufacturer Abracon provides long-term supply program support for this product, which helps ensure supply continuity during mass production.
Recommended Part Numbers for ABS05-32.768KHZ-T
Designers looking for ABS05-32.768KHZ-T recommended parts can evaluate the following options. ABS05-32.768KHZ-T selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.
| Recommended Part |
Brand |
Package |
Description |
| ABM7-106-27.120MHZ |
Abracon Corporation |
|
OCS, XTAL , 27.12MHZ, SMD, LEAD FREE |
| ABLS-15.000MHZ-B4-T |
Abracon Corporation |
|
晶体 CRYSTAL 15.0000MHZ 18PF SMD |
| ABM10-24.000MHZ-D30-T3 |
Abracon Corporation |
|
Crystal 24MHz ±20ppm (Tol) ±30ppm (Stability) 10pF FUND 100Ohm 4-Pin Ultra Mini-CSMD T/R |
EZKEY can provide ABS05-32.768KHZ-T recommended part comparison data and engineering samples for evaluation.