74ALVC164245DGG,11 Application and Selection Guide
74ALVC164245DGG,11 Model and Manufacturer Information
74ALVC164245DGG,11, a Logic ICs manufactured by NXP Semiconductors: 74ALVC164245DGG,11 helps you confirm the specific model, while NXP Semiconductors helps you confirm the product source. If you are selecting a part, you can first check whether 74ALVC164245DGG,11 meets your requirements, then check whether NXP Semiconductors matches your expectations, and then refer to Voltage Level Translator TSSOP48 for further evaluation.
74ALVC164245DGG,11 Product Parameters and Description
The main parameters of NXP Semiconductors's Logic ICs product 74ALVC164245DGG,11 include Voltage Level Translator TSSOP48. This is a Logic ICs produced by NXP Semiconductors, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.
74ALVC164245DGG,11 Application and Selection Reference
NXP Semiconductors's Logic ICs product 74ALVC164245DGG,11 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, 74ALVC164245DGG,11 is a Logic ICs solution worth considering, and manufacturer NXP Semiconductors provides long-term supply program support for this product, which helps ensure supply continuity during mass production.
Recommended Part Numbers for 74ALVC164245DGG,11
Designers looking for 74ALVC164245DGG,11 recommended parts can evaluate the following options. 74ALVC164245DGG,11 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.
| Recommended Part |
Brand |
Package |
Description |
| 74HC165D-Q100,118 |
NXP Semiconductors |
|
Counter Shift Registers 74HC165D-Q100/SOT109/SO16 |
| 74LVC244ABQ,115 |
NXP Semiconductors |
|
Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin DHVQFN EP T/R |
| 74LVC2G17GV,125 |
NXP Semiconductors |
|
IC BUFFER NON-INVERT 5.5V 6TSOP |
EZKEY can provide 74ALVC164245DGG,11 recommended part comparison data and engineering samples for evaluation.